User Manual V3.1
4
This radio transmitter 20637-KLK915MWIFC has been approved by Innovation, Science and Economic Development Canada
to operate with the antenna types listed below, with the maximum permissible gain indicated. Antenna types not included
in this list that have a gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with
this device.
Le présent émetteur radio 20637-KLK915MWIFC a été approuvé par Innovation, Sciences et Développement économique
Canada pour fonctionner avec les types d'antenne énumérés ci-dessous et ayant un gain admissible maximal. Les types
d'antenne non inclus dans cette liste, et dont le gain est supérieur au gain maximal indiqué pour tout type figurant sur la
liste, sont strictement interdits pour l'exploitation de l'émetteur.
Authorized antennas / Antennes autorisées :
868/915 MHz Rubber Dipole WHITE antenna (Swivel RP-SMA Male). REF : KLK02887
Electrical Characteristics :
Frequency range : 862/873 MHz, 902-928MHz
Impedance : 50 ohms
Technology : Dipole
VSWR : <1.7 :1
Max Gain : 3dBi
Polarization : Vertical
Whip material : ABS
Color : White
Connector (Wirnet
TM
iFemtoCell 915) : RP-SMA
Size : 135x20mm
Weigh : 15g
Antenna operating temperature range : -20°C to +55°C
6.3
Power ON
Once the LoRa RF antenna, the Ethernet cable (if used) or the optional 3G/4G USB dongle (with USIM card inserted) and the power supply jack
connector are connected, the Wirnet™ iFemtoCell can be powered ON by connecting the power supply onto the 230VAC mains supply
.
The power supply is provided with E/F type cable (Europe) or B type cable (USA).
6.4
First connection
When the Wirnet™ iFemtoCell
is installed, the first connection can be done by three different ways:
•
Using Ethernet connection:
o
Plug the Wirnet™ iFemtoCell to your box or internet router with an Ethernet cable
o
The connection will be established automatically
•
If you have a WPS (Wi-Fi Protected Setup) compatible AP:
o
Press the WPS button on the Wirnet™ iFemtoCell (see chapter 4 “Overview”
) then press the WPS button on the
Wi-Fi access point of the installation
o
The connection will be established automatically
•
Using the Wi-Fi direct connection:
o
Please contact your reseller for more information about this connection mode
i
i