V1.0 | 24.03.2020 |Page 3
5. Overview of Wanesy
TM
Wave
Symbol
Description
Symbol
Description
Wanesy
TM
Wave
Type of equipment
QR Code
5V 1A
Power supply information
or other marking
CE marking indicating that the product
complies with current European
directives or other marking marking
depending on the country
Board ID
Serial number of board
Marking indicating that the product
complies with RoHS directives
Final product ID
Serial number of product
Do not dispose of with domestic waste
MAC ADDR
MAC address
Refer to the installation instructions
before powering up
EUI
Extended Unique Identifier
IP 30
Indice of protection
6. Installation of Wanesy™ Wave
6.1 Mounting of the enclosure
Two Ø3.3mm holes are usable to fix the product.
These holes are hidden behind the blind lids and will not be visible.
It can also be mounted using straps and accessories (WPMB-M3). This accessories set is not
included per default within our product. It can however be ordered directly through our casing
manufacturer.
The Wanesy™ Wave may be mounted on a wall using the two oblong holes.
Only two screws (not included) are needed, all mounting information is mentioned on the below
drawing.