7
Maintenance and cleaning
CAUTION!
Risk of physical injury to people and animals and material damage
• only perform maintenance and cleaning work when the mains plug is disconnected.
When carrying out cleaning and maintenance work, note the following instructions:
• Keep the device free from dust and soiling.
• Only clean the device with a soft cloth or damp towel.
• The cloth or towel should be free of petrol and / or other solvents, since these can attack or damage the heating plate.
• Never immerse the heating plate in water or clean it with a water jet.
Technical data
Article number / type designation: 70236
Voltage:
Input: 230 V AC, 50 Hz, 0.06 A
Output: 24 V DC, 0.6 A
Output:
15 W (ca. 0,03 W / cm²)
Protection class:
II
Safety
class
IPX4
Dimensions:
ø 264 x 32 mm
Weight:
approx. 0.5 kg
Article number / type designation: 70237
Voltage:
Input: 230 V AC, 50 Hz, 0.09 A
Output: 24 V DC, 0.9 A
Output:
22 W (ca. 0,03 W / cm²)
Protection class:
II
Safety
class
IPX4
Dimensions:
ø 314 x 32 mm
Weight:
approx. 0.9 kg
Declaration of conformity
Albert KERBL GmbH hereby declares that the product / device described in these instructions complies with the fundamental requirements
and other relevant stipulations of Directive 2004/108/EC and 2006/95/EC. The CE mark confirms compliance with the Directives of the European
Union. The declaration of conformity can be viewed by visiting http://www.kerbl.de.
Electronic scrap
Disposing of this device after its service life is the responsibility of the operator.
Please consult the valid national regulations. The device must not be disposed of in household waste.
In accordance with the stipulations of the EU Directive on the Disposal of Electrical and Electronic Devices, the device can be
disposed of free of charge at the local waste collection or recycling centre. Alternatively, it can be returned to retailers who offer a
collection service. The proper disposal helps to ensure environmental protection and prevents any adverse effects on human health
and the environment.
