20
4. Product Structure and Function
Your trailer camera set contains the following:
Wireless Video Camera
Attention! If you change the transmission channel on the camera you must also change the reception channel on the LCD
monitor correspondingly.
5. Initial operation
Charging the Camera and Receiver
1. Connect the camera/receiver with the auto cigarette lighter using the charging cable. Your camera and receiver are
being charged. A full charge will take about 4 hours each for the camera and for the receiver respectively.
Note: You need to remove the cover on the camera before charging
2. The camera is operational during charging. Adjust the Power ON/OFF/Channel switch-button to channel 1, then you
can use it.
(Kanalwähler auf 1), um sie zu verwenden.
Camera
Notes for camera:
• If the battery is empty please recharge it using the charging cable.
• Always keep the weatherproof cover fitted regardless of conditions.
CAMERA LED INDICATOR
STATUS
Red ON
Charging when power is off
OFF
Power off (disconnect with cigarette lighter) / Finish charging
Green ON
Power is on
Yellow ON
Charging while power is on
Weather
proof cover
Antenna
Magnetic Stand
Power Jack
LED Indicator
Antenna
Power ON/OFF
Channel Switch
Lens
Infrared-LEDs
#1088
