2-18
BOP HIPWR 091719
NOTE: If source power to the BOP 1KW-ME is removed or lost while a browser window is
open, communication with the BOP 1KW-ME cannot be restored until the present
browser window is closed and a new window is opened.
Upon initial display of the web page, it is good practice to click the browser Refresh/Reload but-
ton once to ensure that the power supply information displayed is up to date, and not prior infor-
mation recalled from the browser cache.
Although most current browsers will work, Kepco recommends the following as fully supported:
Safari, IE 8.0 and higher and Firefox 1.0 and higher. Popup blocking must be disabled and
Javascript must be enabled for proper operation. If popup blocking is enabled, it may prevent
viewing of the help screens.
The BOP 1KW-ME Instrument Home page identifies the unit which has been accessed, includ-
ing Manufacturer, Instrument, Description, LXI Version (1.4), Serial Number, Calibration Date,
Hostname, MAC Address, LXI Firmware Revision and TCP/IP Address. Click the HELP box at
the left of the screen for detailed explanations of each. These parameters can not be changed
by the user. The hostname ends with .LOCAL if the MDNS has been completely resolved. This
feature allows for easy discovery through the MDNS or Bonjour common naming system.
Clicking the ID INSTRUMENT box at the left of the screen, causes the physical LAN indicator on
the rear panel of the selected unit to blink (see Figure 2-1), allowing visual confirmation as to
which unit is selected. This is especially important if more than one unit is found on the LAN.
FIGURE 2-9. WEB INTERFACE HOME PAGE (UNIT DESCRIPTION)
2.7.6.5
LAN CONFIGURATION USING WEB INTERFACE
From the Web Interface Home Page (Figure 2-9) click on CONFIGURE LAN at the left to view
the LAN Configuration page (Figure 2-10). The parameters that can be configured from this
page are Host Name (DHCP), Description, IP Address, Subnet Mask address, Default Gateway
Address, and DNS Server Address. Separate check-boxes allow enabling of DHCP, AUTOIP
and PING. Descriptions of these terms can be viewed by clicking the HELP box at the left. If a
Summary of Contents for BOP-ME 1KW
