08/06
Section 5
Frame Modifications
5-4
when reducing the wheelbase, we recommend that the suspension be moved forward and relocated on the original rail
The rail behind the suspension can then be cut to achieve the desired frame cutoff See Figure 5–3
Do not drill new holes any closer than 2 inches (50 mm) to existing holes. Frame drilling
affects the strength of the rails. failure to comply may result in personal injury, death,
equipment or property damage.
Before the rear suspension is relocated, check the new location of the spring hanger brackets The new holes for the
spring hanger brackets must not overlap existing holes and should not come any closer than 2 inches (50 mm) to existing
holes
figure 5-3.
Comparison of Original, Shortened, and Extended wheelbases
Warning!
Original wheelbase
Extended wheelbase
Shortened wheelbase
Cut Frame at Rear to
Obtain Desired Cutoff
Do Not Mount the
Suspension Bracket
On the Added
Frame Rail
Mount the suspension Brackets On the
Original Rail (see frame insert section &
Figures 5-1 and 5-2)
Relocated Rear
Suspension
Summary of Contents for T470
