Kenworth K270, Body Builder'S Manual

Page: 71 / 96

7-14
17. Remove the connectors to the left and right of the steering column.
18. Remove the connectors (2) and the earth connections (3).
19. Remove the attachment bolts on the underside of the dashboard, left and right.
20. Remove the attachment bolts (4) and (1).
21. Take the cover plate in the A-post out of the retainer, remove the handgrip's attachment bolt and remove the handgrip (5).
22. Remove the floor mats. Remove the diagnostic and ECAS connectors by taking the wiring apart and then removing the attachment
bolts. Detach the connectors from the bracket.
23. Remove the floor pan above the wiring.
24. Remove the wiring in front of the seat.
25. Remove the attachment bolts in the surrounding frame.
26. Remove the attachment bolts on the underside and remove the complete dashboard.
Installing dashboard
1. Fit the dashboard and secure it in the surrounding frame with a few attachment bolts.
2. Fit the seat wiring.
3. Replace the floor pan above the wiring.
4. Fit the ECAS and diagnostic connectors to the bracket.
5. Fit the handgrip and the cover panel in the A-post
6. Fit the connectors in the central box.
7. Remove the blocks from the coolant hoses and attach the hoses.
8. Fit the connectors to the left and right of the steering column.
9. Fit the attachment bolts (1).
10. Fit the heater hoses (2).
Section 7
Electrical