Kenwood XD-9581MD Instruction Manual Download

Page: 82 / 84

XD-9581MD (En)

Preparation section

Basic section

Application section

Knowledge sections

In case of difficulty

Remedy

Cause

Symptom

CD player section

Place the disc properly, with the label side
facing upward.

Place the disc properly.

Clean the disc referring to “Disc handling
precautions”.

Try another disc.

Refer to “Beware of condensation” and
remove the condensation by evaporation.

Place a disc in the CD player.

Press the

key.

Clean the disc referring to “Disc handling
precautions”.

Try another disc.

Clean the disc referring to “Disc handling
precautions”.

Try another disc.

Install the unit in a place not subject to
vibrations.

A CD is placed in the player but it cannot
be played.

Sound is not produced.

Sound skips.

The disc is placed upside down.

The disc position is displaced.

The disc is extremely dirty.

The disc is scratched.

Dew is condensed on the optics lens.

The disc has not been placed.

The player is not put to the play mode.

The disc is extremely dirty.

The disc is scratched.

The disc is dirty.

The disc is scratched.

The player is subject to vibration.

)

Remote control unit

Symptom

Cause

Remedy

Remote control operation is not possible.

Batteries are exhausted.

The remote control is too far away from the
system, the controlling angle is deviated or
there is an obstacle in between.

There is no CD or MD set in the component
to be played.

Replace with new batteries.

Operate the unit inside the remote control-
lable range.

Set a CD or MD in the component to be
played.

Summary of Contents for XD-9581MD





















































































Search results

Summary of Contents for XD-9581MD

Reviews:

Related manuals for XD-9581MD

Brands by name

Popular brands

Kenwood XD-9581MD, Instruction Manual

Search results

Summary of Contents for XD-9581MD

Reviews:

Related manuals for XD-9581MD

Brands by name

Popular brands