G
[All Call] key
Press and hold to make an All Call.
●
Any function can be configured to the [
All Call
] key. The unit may
come with a different function for this key. For details, please
consult the authorized dealer or installer.
H
Power key
Press and hold to turn the power on/off. Press to check the remaining
capacity in the battery. The battery charge LED blinks.
I
Microphone
When making a call without using the clip microphone, speak into this
microphone.
●
This key is disabled when a clip microphone or headset which is
sold separately is connected.
J
Microphone/ Earphone jack
For connecting a clip microphone, earphone or headset which is sold
separately. Do not connect any device other than the compatible
models.
K
Battery Charge LED
Indicates the charging status.
●
Light up: Charging in progress
●
Blinking: Charging in preparation, or charging error
●
Light goes off: Charging complete
L
[
J
]/ [
K
] key
For adjusting the receiver volume level. The receiver volume changes
with each press of the [
J
]/[
K
] key, from level 1 to 15. For details, refer
to
“
ADJUSTING THE RECEIVER VOLUME LEVEL
”
.
M
Data setting connector
For registering this unit to the system or changing the settings.
●
Normally not used. Do not open the cover. And do not touch the
connector.
N
Charge contact terminal
REGISTERING SUB UNIT TO BASE UNIT
This unit is used when the transceiver to be used as a sub unit is
registered to the Portable base WD-K10PBS or Base Station WD-
K10BS that is to be used as the base unit.
This section explains on how to register the sub unit to the base
unit (Portable base WD-K10PBS).
18
Summary of Contents for WD-K10PBS
Page 147: ......
