Kenwood VR-8060, Instruction Manual

Page: 23 / 44

23
EN
Recording audio (analog sources)
Recording a music source
1
Use the Input Selector keys to select the source (other than “MD/
TAPE”) you want to record.
2
Set the MD or TAPE recorder to record.
3
Start playback, then start recording.
Recording video
1
Use the Input selector keys to select the video source (other than
“VIDEO 1”) you want to record.
2
Set the video deck connected to VIDEO 1 to record.
• Select the REC MODE to record a digital input source.
3
Start playback, then start recording.
• Recording may not be normal for some video software. This is due
to the copy guard condition.
w
Recording audio (digital sources)
Switch on the REC MODE to record a digital input source.
Usually use the REC MODE AUTO to record audio input sources. When
the digital mode changes during recording in the REC MODE AUTO , the
audio input source may be interrupted momentarily.
Recording music in REC MODE AUTO or MANUAL
Input Selector
DIMMER
1
Use the Input Selector keys to select the source (CD/DVD,
DVD/6CH, VIDEO 2, VIDEO 3) you want to record.
2
Set the MD or TAPE recorder to record.
Recording
3
Press and hold the DIMMER key for more than 2 seconds to
select the REC MODE AUTO or MANUAL.
1
REC MODE off : The digital input record mode is
switched off.
2
REC MODE AUTO : The digital input signals (DTS, Dolby
Digital, or PCM) are identified auto-
matically and converted into stereo
signals that are ready for recording.
3
REC MODE MANUAL : The input signal type at the moment
this mode is selected is held through-
out this mode.
• When the REC MODE MANUAL is selected, the digital input signal
is converted to stereo signals (down-mix). But once the digital signal
is changed to other signal, no signal is output.
When the
REC MODE AUTO is selected, the digital input signal is
converted to stereo signals even if the digital signal is changed.
For REC MODE AUTO :
L
S SB SL SR
C R
SP MUTE OPTICAL 6CH INPUT
COAXIAL ANALOG 96kHzfs
CINEMA EQ.
ACTIVE EQ.
DSP MODE
DTS.
MATRIX
DISCRETE
DOLBY DIGITAL
PRO LOGIC
STEREO
LOUDNESS
NEO:6
CSII
A B CLIP
AUTO DETECT THX
AUTO
RDS
RTY
MEMO
STEREO
TUNED
Surround EX
LFE
L
S SB
C R
SP MUTE OPTICAL 6CH INPUT
COAXIAL ANALOG 96kHzfs
CINEMA EQ.
ACTIVE EQ.
DSP MODE
DTS.
MATRIX
DISCRETE
DOLBY DIGITAL
PRO LOGIC
STEREO
LOUDNESS
NEO:6
CSII
A B CLIP
AUTO DETECT THX
AUTO
RDS
RTY
MEMO
STEREO
TUNED
Surround EX
LFE
SL SR
For REC MODE MANUAL :
L
SL S SB SR
C R
LFE
SP MUTE OPTICAL 6CH INPUT
COAXIAL ANALOG 96kHzfs
CINEMA EQ.
ACTIVE EQ.
DSP MODE
DTS.
MATRIX
DISCRETE
DOLBY DIGITAL
PRO LOGIC
STEREO
LOUDNESS
NEO:6
CSII
A B CLIP
AUTO DETECT THX
AUTO
RDS
RTY
MEMO
STEREO
TUNED
Surround EX
L
SL S SB SR
C R
LFE
SP MUTE OPTICAL 6CH INPUT
COAXIAL ANALOG 96kHzfs
CINEMA EQ.
ACTIVE EQ.
DSP MODE
DTS.
MATRIX
DISCRETE
DOLBY DIGITAL
PRO LOGIC
STEREO
LOUDNESS
NEO:6
CSII
A B CLIP
AUTO DETECT THX
AUTO
RDS
RTY
MEMO
STEREO
TUNED
Surround EX
4
Start playback, then start recording.
• If the audio reproduction stops in the middle due to change in the
input signals, etc., press the DIMMER key.
MD/TAPE
*5470/17-25/EN 04.6.10, 5:45 PM 23