7
S
cAn
p
rogrAMMing
Note:
Scan programming is only available when using Conventional operation.
■
Conventional Operation
If Scan Type has been programmed for Conventional operation, you are able
to reprogram your scan list.
1
Press the key programmed as
Scan Program
.
• The
(KCH-4 ) or
SCAN
(KCH-5) icon appears on the display and blinks.
2
Press the
GRP
and
keys or rotate the
CH
control to select the zone
and channel you will add to or remove from the Scan list.
• Press the
PF 2
key to toggle between Zone Select and Channel Select.
3
Press the
PF 4
key to add or remove the selected zone or channel to/ from
the scan list.
• The zone add indicator (KCH-4:
/ KCH-5:
)/
channel add indicator (KCH-4:
/ KCH-5:
) will
appear on the display when the selected channel is added to the scan sequence.
4
Press the
PF 1
key to exit scan programming.
If the Priority channel has been set as Operator Selectable by your dealer, you
are able to reprogram the Priority mode as well.
1
Press the key programmed as
Scan Program
.
• The
(KCH-4) or
SCAN
(KCH-5) icon appears on the display and blinks.
2
Press and hold the
PF 3
key to edit the Priority channel.
3
Press the
GRP
and
keys or rotate the
CH
control to select the
channel you will set or unset as Priority.
4
Press the
PF 4
key to toggle the selected channel between Priority and
Normal.
• “P”, “P2”, or “PP” appears on the sub-display when Priority mode is selected.
5
Press the
PF 3
key again to set the new channel setting.
6
Press the
PF 1
key to exit scan programming.
Summary of Contents for UHF P25 Transceiver TK-5810
Page 2: ......
