![background image](http://html.mh-extra.com/html/kenwood/uhf-p25-transceiver-tk-5810/uhf-p25-transceiver-tk-5810_instruction-manual_191789019.webp)
3
■
Making Group Calls (P25)
Channels programmed for Conventional P25 and Trunking P25 operation
already have a Group ID assigned. For these channels, simply press and hold
the
PTT
switch to make the call.
• On Trunking channels, if the traffic channel is busy, a busy message appears and
the busy tone sounds. Release the
PTT
switch and wait for the channel to become
free. When the traffic channel becomes free, a proceed tone sounds.
Otherwise, if a key has been programmed with
Talkgroup
(Conventional P25
only), you can select a group ID from the list to make a call to those parties.
To select a group ID:
1
Press the key programmed as
Talkgroup
.
2
Press the
GRP
and
keys or rotate the
CH
control to select a group
ID/name from the list that has been pre-entered into your transceiver.
• The target group ID/name appears on the display.
3
Press the
PF 1
key to accept the group ID/name.
4
Press and hold the microphone
PTT
switch to make the call.
• Speak into the transceiver as you would during a normal transmission.
■
Making Individual Calls (P25)
If a key has been programmed with
Individual
, you can make calls to
specified persons.
1
Press the key programmed as
Individual
.
2
Press the
GRP
and
keys or rotate the
CH
control to select a unit ID
from the list that has been pre-entered into your transceiver.
• Alternatively, you can directly enter a unit ID by using a DTMF keypad.
• The target unit ID/name appears on the display.
3
Press and hold the microphone
PTT
switch to make the call.
•
Speak into the transceiver as you would during a normal transmission.
• On Trunking channels, a ringing tone will sound and the display will alternate
between the called unit ID/name and “CALLING”.
4
On Trunking channels, to end the call, press the
PF 1
key or the DTMF
#
key.
Summary of Contents for UHF P25 Transceiver TK-5810
Page 2: ......