l
To
stop
toasting during the cycle,
press the ‘cancel’ button, the toast
will pop up and the ‘cancel’ button
light will go off.
5
Your toast will pop up
automatically,
to raise it higher,
lift the lever.
Defrost position
l
To defrost frozen bread, select the
defrost position on the browning
control.
Reheat
l
To warm toast that has popped
up but gone cold, lower the toast
then press the ‘reheat’ button.
The‘reheat’ button will illuminate.
Bagel (A)
l
To toast bagels the cut face should
be facing the front of the toaster.
Select the desired browning setting
and lower the carriage lever.
Press the ‘Bagel’ button and it will
illuminate.
l
Note: when toasting using the
bagel button, the front element
will toast with a higher heat than
the element at the back of the
toaster.
This will result in only
one side of the item being
toasted.
hints on using your
toaster
l
Select a lower setting for light
browning or for dry bread.
l
When toasting a single slice of
bread, you may notice a variation
in toast colour from one side to the
other - this is normal.
l
Dry/stale bread toasts more
quickly than fresh bread and thinly
sliced bread toasts more quickly
than thickly sliced bread. Therefore
the browning control should be set
at a lower setting than usual.
l
For best results ensure that
the bread slices are of an even
thickness, freshness and size.
l
In order to achieve uniform
browning we recommend you
wait a minimum of 30 seconds
between each toasting so that the
control can automatically reset.
Alternatively select a lower setting
when additional toasting is carried
out.
care and cleaning
1 Before cleaning, unplug your
toaster and let it cool down.
2 Wipe the outside of the toaster
with a damp cloth, then dry. Do
not use abrasives.
crumb tray
l
Slide out the crumb tray
3
. Clean,
then replace. Do this regularly:
crumbs can smoke or even burn.
l
Do not dishwash the crumb
tray.
glass panel
l
Remove the glass panel for
cleaning by opening forward
4
and lift off
5
. Wipe with a damp
cloth and dry.
l
Replace the panel by aligning the
slots
6
on the side of the panel
with the hinge pins
7
and close.
Note: the toaster will not
operate if the glass panel
is not fitted and locked
correctly.
l
Do not dishwash or immerse the
glass panel in water.
heating tubes
l
Do not touch or wipe the heating
tubes as this will damage them.
l
Any loose crumbs found under the
heating tube should be cleared by
remove the glass panel and gently
shaking the toaster to allow them
to drop into the crumb tray.
5