70
TM-V708A
LEVEL DIAGRAM
Transmitter Section
2.5mV
1.6V
0.63V
0.53V
80mV
0dBm
+10dBm
+19dBm
+25dBm
MODULE
Q6
Q8
Q9
IC2
ANT
-1dBm
-2dBm
80mV
+14dBm
+21dBm
+26dBm
Q309
Q307
Q304
IC302
Q310
MODULE
MIC
PKD
(data communications)
IC801
Q801
Q802
IC804
VHF
VCO
UHF
VCO
1200bps
9600bps
Note1: Set the AG so that the microphone socket input is 3kHz
deviation at 1kHz modulation.
The data communication connector input level is 3kHz
deviation at 1kHz modulation for 1200bps and 2kHz
deviation at 1kHz modulation for 9600bps.
Note2: The transmit frequency is 145.0 or 435.0MHz.
Note3: The HI/MID/LOW switch is set to HI.
Note4: The measurements with the power meter, except for the
ANT connector, are the values with the APC off.
Receiver Section
360mV
360mV
VHF
IF IC
UHF
IF IC
IC100
IC400
-101dBm
-109dBm
-106dBm
-108dBm
-105dBm
-106dBm
-98dBm
Q406
Q502
Q501
-103dBm
Q508
Q505
Q203
-100dBm
Q202
Q507
Q205
Q200
Q201
Q112
38.85MHz
45.05MHz
MAIN VHF
MAIN UHF
SUB VHF
SUB UHF
AF
AF
-105dBm
Note1: The 12dB SINAD levels were plotted using a standard signal
generator through a 0.01µF ceramic capacitor at each point
from the RF to the first IF.
Note2: The AF levels were measured with an AF voltmeter when
the -73dBm (50µV) standard signal generator signal
modulated by a 1kHz modulation frequency and a 3kHz
deviation was received and the AF output was adjusted to
0.63V/8
Ω
by the AF VR.