Kenwood TKR-750, Programming Reference Manual

Page: 13 / 83

Version: 1.01 Field Programming Reference (FPRG) 8
3 MENU DESCRIPTION
3.3 Shortcut Keys
The following shortcut keys is assigned for each
command of KPG-91D.
3.3.1 Menu Bar Operation
Table 3-11 Shortcut Keys used in the Menu Bar
3.3.2 “File” Menu Operation
Table 3-12 Shortcut Keys used in the “File” Menu
3.3.3 “Channel Information” Window
Table 3-13 Shortcut Keys used in the “Channel Information”
Window
3.3.4 “Program” Menu
Table 3-14 Shortcut Keys used in the “Program” Menu
Key Name Function
[Alt]
[F10]
You can select the Menu Bar.
The “File” menu opens in the same way as the
cursor is placed on the “File” in the menu bar.
[(ING1)]
[(ING2)]
You can select the menu title using the [(ING1)]
and [(ING2)] keys after selecting the menu bar
with the [Alt] key.
[(ING3)] key
[(ING4)] key You can open the selected menu and select the
function to be executed.
[Enter] key
• Press the [Enter] key while selecting the
menu title to open the menu.
• Press the [Enter] key while the menu is
opened to execute the selected function.
Key Name Function
[Ctrl] + [n] Perform “File” > “New”. (Refer to 4.1 New.)
[Ctrl] + [o]
Perform “File” > “Open”. (Refer to 4.2
Open.)
[Ctrl] + [s] Perform “File” > “Save”. (Refer to 4.3 Save.)
[Ctrl] + [p] Perform “File” > “Print”. (Refer to 4.5 Print.)
Key Name Function
[Shift] + [F3]
Appear the “Channel Copy” window. You
can also copy the configured channel data
to the specified channel.
(Refer to 6.1.13
Channel Copy ([Shift] + [F3]).)
[Shift] + [F4]
Appear the “Frequency Copy” window. You
can copy the “Reception Frequency” data to
the “Transmission Frequency” data.
(Refer
to 6.1.14 Frequency Copy ([Shift] + [F4]).)
[Shift] + [F5]
Appear the “QT/DQT Copy” window. You
can copy the configuration data of the “QT/
DQT Decode” to the “QT/DQT Encode”
data.
(Refer to 6.1.15 QT/DQT Copy ([Shift]
+ [F5]).)
[Shift] + [F9]
Insert a new channel into the specified
channel.**1
(Refer to 6.1.16 Channel Insert
([Shift] + [F9]).)
[Shift] + [F10]
Delete the selected channel. (Refer to
6.1.17 Channel Delete ([Shift] + [F10]).)
[F11]
Appear the “Channel Edit” window. (Refer to
6.1.12 Channel Edit Button, 6.2 Channel
Edit Window.)
Key Name Function
[Ctrl] + [r]
Perform “Program” > “Read Data from
Repeater”.
(Refer to 7.1 Read Data from
Repeater.)
[Ctrl] + [w]
Perform “Program” > “Write Data to
Repeater”.
(Refer to 7.2 Write Data to Repeater.)
[Ctrl] + [t]
Perform “Program” > “Test Mode”. (Refer to
7.3 Test Mode Window.)