Field Programming Reference (FPRG)
20
6 EDIT MENU
6.1.14 Frequency Copy ([Shift] + [F4])
It can copy the data configured in the “Reception
Frequency” to the “Transmission Frequency” of the same
channel.
Follow the procedures given below to copy the frequency.
1.
Select the channel to copy.
You can select the channel by clicking the channel
number.
2.
Press [Shift] + [F4].
The “Frequency Copy” window appears.
Figure 6-3 Frequency Copy window
3.
Click “Copy”.
The data configured in the “Reception Frequency” is
copied to the “Transmission Frequency” of the same
channel.
Note:
!
When directly entering the frequency in the “Frequency
Copy” window, the entered frequency is used as the
“Transmission Frequency”.
!
You cannot copy the “Reception Frequency” data to other
channels.
!
You can copy the configuration data only when the source
channel has the Reception Frequency data.
6.1.15 QT/DQT Copy ([Shift] + [F5])
It can copy the data configured in the “QT/DQT Decode”
to the “QT/DQT Encode” of the same channel.
Follow the procedures given below to copy the QT/DQT
code.
1.
Select the channel to copy.
You can select the channel by clicking the channel
number.
2.
Press [Shift] + [F5].
You can view the “QT/DQT Copy” window.
Figure 6-4 QT/DQT Copy window
3.
Click “Copy”.
You can copy the data configured in the “QT/DQT
Decode” to the “QT/DQT Encode” of the same
channel.
Note:
!
When directly entering the QT/DQT Encode code in the “QT/
DQT Copy” window or selecting it from the dropdown list,
the entered value is used as the “QT/DQT Encode”.
!
You cannot copy the “QT/DQT Decode” configuration data to
other channels.
!
You can copy the configuration data only when the source
channel has the QT/DQT Decode configuration data.
6.1.16 Channel Insert ([Shift] + [F9])
It can insert a new channel to the channel list.
Follow the procedures below to insert the channel.
1.
Select one of the channels to insert a new channel.
You can select the channel by clicking the channel
number.
2.
Press [Shift] and [F9] at the same time.
The new channel is inserted on top of the selected
channel. The channel number of the channels
following the inserted channel increases in steps of 1.
Note:
You cannot insert a new channel when the data is
configured to the last channel (No. 16).
6.1.17 Channel Delete ([Shift] + [F10])
It can delete channel data.
Follow the procedures given below to delete the channel
data.
1.
Select the channel to delete.
You can select the channel by clicking the channel
number.
2.
Press [Shift] + [F10] at the same time.
The selected channel is deleted. The channel number
of the channels following the deleted channel
decreases in steps of 1.
Summary of Contents for TKR-750
Page 2: ......
Page 64: ...6 EDIT MENU 59 Field Programming Reference FPRG Version 1 01 ...
Page 79: ......
Page 83: ......
