Kenwood TK-90, Service Manual

Page: 72 / 142

TK-90
72
Menu
Item Display
Condition Alignment
Method
No. Frequency Mode RX or TX Item
20 Power Control (25W) POC 25W:
***
13.1MHz CW TX POC (25W) DAC_POC data by [ ] or [ ] key
21 RF Meter (25W) RFM 25W:
***
13.1MHz CW TX - One push [ ] or [ ] key to get
ADC_RFM
22 Power Control (10W) POC 10W:
***
13.1MHz CW TX POC (10W) DAC_POC data by [ ] or [ ] key
23 RF Meter (10W) RFM 10W:
***
13.1MHz CW TX - One push [ ] or [ ] key to get
ADC_RFM
24 Power Control (5W) POC 5W:
***
13.1MHz CW TX POC (5W) DAC_POC data by [ ] or [ ] key
25 RF Meter (5W) RFM 5W:
***
13.1MHz CW TX - One push [ ] or [ ] key to get
ADC_RFM
26 Mic Sense SSB MOD:
***
13.1MHz USB TX MOD_2 (SSB) DAC_MOD data by [ ] or [ ] key
27 Power (50W) PGC 50W:
***
13.1MHz USB TX PGC (50W) DAC_PGC data by [ ] or [ ] key
28 Tracking (25W) PGC 25W:
***
13.1MHz USB TX PGC (25W) DAC_PGC data by [ ] or [ ] key
29 Gain Control (10W) PGC 10W:
***
13.1MHz USB TX PGC (10W) DAC_PGC data by [ ] or [ ] key
30 (5W) PGC 5W:
***
13.1MHz USB TX PGC (5W) DAC_PGC data by [ ] or [ ] key
31 Frequency (Band 1) TGC TX1:
***
2.1MHz USB TX TGC (TX1) DAC_MOD data by [ ] or [ ] key
32 Tracking (Band 2) TGC TX2:
***
4.1MHz USB TX TGC (TX2) DAC_MOD data by [ ] or [ ] key
33 Gain Control (Band 3) TGC TX3:
***
7.1MHz USB TX TGC (TX3) DAC_MOD data by [ ] or [ ] key
34 (Band 5) TGC TX5:
***
21.1MHz USB TX TGC (TX5) DAC_MOD data by [ ] or [ ] key
35 (Band 6) TGC TX6:
***
25.1MHz USB TX TGC (TX6) DAC_MOD data by [ ] or [ ] key
36 (Band 7) TGC TX7:
***
28.1MHz USB TX TGC (TX7) DAC_MOD data by [ ] or [ ] key
37 AM Modulation AM MOD :
***
13.1MHz AM TX MOD_2 (AM) DAC_MOD data by [ ] or [ ] key
Sensitivity
38 AM Maximum AM MAX :
***
13.1MHz AM TX AMM DAC_AMM data by [ ] or [ ] key
Sensitivity
39 Over-current PRO FIN:
***
1.7MHz CW TX POC Hardware alignment
Protection (Final) Refer to ADJUSTMENT
40 Over-current PRO DRV:
***
18MHz CW TX POC Hardware alignment
Protection (Drive) Refer to ADJUSTMENT
41 VSWR Protection SWR PRO:
***
13.1MHz CW TX PRO DAC_PRO data by [ ] or [ ] key
42 Slow Fan-speed Check FANSLOW: – – – 13.2MHz USB RX - Check only
43 Fast Fan-speed Check FANFAST: – – – 13.2MHz USB RX - Check only
44 Carrier Frequency for U CAR2 : 000 13.1MHz USB TX LO1 CAR Skip
Option filter (USB)
45 Carrier Frequency for L CAR2 : 000 13.1MHz LSB TX LO1 CAR Skip
Option filter (LSB)
46 Checksum SUM =
****
RX - Check only
47 Display Test ALL Display RX - Check only
48 Write WRITE TO ROM RX - EEPROM write by [ ] or [ ] key
13.1MHz is TX alignment standard frequency.
13.2MHz is RX alignment standard frequency.
ADJUSTMENT