14
K
EYPAD
E
NTRY
Besides using the and keys, you can enter dialing codes manually, by
entering the numbers using the microphone keypad.
• Refer to the dialing codes listed in the appendix, starting on page 25.
■
R
EDIALING
If a key has been programmed with
Redial
(default is the
A
key), you can
easily redial previously dialed call addresses.
Redial:
1
Press the key programmed as
Redial
.
2
Press
the and keys to select 1 of the 3 last dialed numbers.
3
Press
the
Call
key or the
PTT
switch to initiate the call.
E
MERGENCY
C
ALLS
If your transceiver has been programmed with the Emergency function, you can
make emergency calls.
Note:
Only the
key can be programmed with the Emergency function.
Press and hold the key programmed as
Emergency
.
• Depending on the delay time programmed into your transceiver, the length of time you
must hold the
Emergency
key will vary.
P
UBLIC
A
DDRESS
(PA)
If your transceiver is connected to an external PA speaker, you can use the
transceiver as a Public Address system.
1
Press the key programmed as
Public Address
.
• The icon appears on the display while the PA system is active.
2
Press the microphone
PTT
switch, then speak into the microphone.
• Press
the and
keys (
Volume Up
/
Volume Down
) to adjust the audio output
from the external speaker.
3
Press
the
Public Address
key again to return to normal operation.
H
ORN
A
LERT
If your transceiver is connected to your vehicle horn or other external device, this
function can alert you of an incoming call when you are away from your vehicle.
Toggle Horn Alert ON and OFF by pressing the key programmed as
Horn Alert
.
• The icon appears on the display while Horn Alert is active.
Summary of Contents for TK-7185
Page 35: ......
