6
BASIC OPERATIONS
S
WITCHING
P
OWER
ON/ OFF
Press the
switch to switch the transceiver ON.
• A beep sounds and the display momentarily lights up.
• If the Transceiver Password function is programmed, “PASSWORD” appears on the
display. If a key has been programmed as
Transceiver Password
, you must press this
key fi rst, before “PASSWORD” appears on the display. You must enter the password to
unlock the transceiver. Refer to “Transceiver Password”, below.
Press the
switch again to switch the transceiver OFF.
• If set up by your dealer, the transceiver will switch ON and OFF with the vehicle ignition.
■
T
RANSCEIVER
P
ASSWORD
To enter the transceiver password:
1
Press the microphone DTMF keys corresponding to the password digits.
• Alternatively, you can enter the password by pressing the
and
keys to select
a digit, followed by pressing the
C>
key to accept the entered digit and move to
the next digit.
• Press
the
A
or microphone
#
key to delete an incorrect character. Press and hold
the
A
or microphone
#
key to delete all entered characters.
2
Press
the
S
or microphone key to confi rm the password.
• If you enter an incorrect password, an error tone sounds and the transceiver
remains locked.
A
DJUSTING
THE
V
OLUME
Press the key to increase the volume and the
key to decrease the volume.
When increasing or decreasing the volume level, the Volume Level indicator
appears on the display. The transceiver volume level can be adjusted between
levels 0 and 31.
Summary of Contents for TK-7185
Page 35: ......
