23
TK-5710
(
B
)
/5710H
(
B
)
Control
unit
CN702
Final unit
W2
W2 terminal
cable
Accessory
cable
W2 terminal
cable
■
Painting the lubricant (Part No.:490-0019-05) on
the groove of the case packing
Paint the lubricant to the position as shown in figure after
replacing or assembling the case packing.
Note :
To assure waterproofing, paint the lubricant on the
groove of the case packing.
■
Affixing the sheet (G11-4378-04) :TK-5710(B) only
1. Remove the covering paper of the sheet
z
.
2. Affix it to one side of chassis, so that the hollow of the
sheet fits the convex of the chassis
x
.
Note :
Affix it so as not to leave a gap between the sheet and
the chassis side.
3. Repeat step 2 to affix the sheet to the other side of
chassis.
■
Align the cable connecting the W2 terminal :
TK-5710H(B) only
When you assemble the final unit, align the cable
connecting the W2 terminal as shown in figure, then
insert it into the connector (CN702) of the control unit.
2
2
1
sheet
chassis side
Confirm that there is no
gap between the sheet and
the chassis side.
DISASSEMBLY FOR REPAIR
• Case packing (Upper)
• Case packing (Lower)
TK-5710(B)
TK-5710(B)
TK-5710H(B)
TK-5710H(B)
Paint the lubricant (Part No.490-0019-05)
on the groove of the case packing.
lubricant
lubricant
OK
NG
case packing
groove of the
case packing
Paint the lubricant (Part No.490-0019-05)
on the groove of the case packing.
lubricant
lubricant
OK
NG
case packing
groove of the
case packing