Kenwood TK-360G Service Manual Download Page 18

Page: 18 / 57

TK-360G/(N)/370G/(N)

DISASSEMBLY FOR REPAIR

Separating the case assembly from the chassis.

1. Remove the two knobs

and three round units

2. Remove the two screws

3. Expand the right and left sides of the bottom of the case

assembly, lift the chassis, and remove it from the case
assembly

4. Taking cure not to cut the speaker lead

, open the chassis and

case assembly, and pull the speaker lead with connector

Separating the chassis from the unit.
• TK-360G

1. Remove the twelve small screws

, and remove the three

large screws

2. Remove the solder from the antenna terminal using a solder

iron then lift the unit off (X57).

• TK-370G

1. Remove the three screws

Lift the unit (X54), and rise up the connecter lever in the

arrow with your finger

Remove the three hexagonal bosses

Ω

, and remove the

twelve screws

2. Remove the solder from the antenna terminal using a

soldering iron, then lift the unit off (X57).

TK-370G

stopper

TK-360G

CN3

TK-370G

Antenna teminal

X54-

X57-

❾

❿

➐

❽

❾

❽

➐

Unsolder

TK-360G/370G
E, (N)E only

Summary of Contents for TK-360G


























































Search results

Summary of Contents for TK-360G

Reviews:

Related manuals for TK-360G

Brands by name

Popular brands

Kenwood TK-360G, Service Manual

Search results

Summary of Contents for TK-360G

Reviews:

Related manuals for TK-360G

Brands by name

Popular brands