TK-3160
9
DISASSEMBLY FOR REPAIR /
维修拆卸
• Installation of chassis and cabinet assy
Second, press down the Chassis to the cabinet assy as
shown in the diagram.
Good Condition /
正确状态
NG Condition /
不正确状态
After mount, packing should be in this condition.
组装后，垫子应如上述状态。
Packing deform.
垫子变形。
Note:
• Take care that the packing does not protrude from the
chassis or case.
• Replace the protruded or deformed packing with a new one.
First, mount the set to the cabinet assy.
•
底架和机壳的组装
注意∶
•
请小心垫子，不要让它露出底架或机壳。
•
如果露出或变形请换新的垫子。
首先 , 组装机壳。
然后 , 如图所示按压底架到机壳上。
Do not press this area, top packing easily deform.
请不要按压这个区域 , 上垫片容易变形。
Packing protruded out.
垫子露出。
