2
TK-3130/3131
GENERAL
INTRODUCTION
SCOPE OF THIS MANUAL
This manual is intended for use by experienced techni-
cians familiar with similar types of commercial grade com-
munications equipment. It contains all required service in-
formation for the equipment and is current as of this publica-
tion date. Changes which may occur after publication are
covered by either Service Bulletins or Manual Revisions,
which are issued as required.
ORDERING REPLACEMENT PARTS
When ordering replacement parts or equipment informa-
tion, the full part identification number should be included.
This applies to all parts : components, kits, and chassis. If
the part number is not known, include the chassis or kit
number of which it is a part and a sufficient description of
the required component, for proper identification.
PERSONNEL SAFETY
The following precautions are recommended for person-
nel safety :
• DO NOT transmit until all RF connectors are secure and
any open connectors are properly terminated.
• SHUT OFF this equipment when near electrical blasting
caps or while in an explosive atmosphere.
• This equipment should be serviced by only qualified tech-
nicians.
SERVICE
This radio is designed for easy servicing. Refer to the
schematic diagrams, printed circuit board views, and align-
ment procedures contained within.
TK-3130
Destination
Number of CH
Frequency No. / Frequency / Color
Factory default CH setting
RF power output
K
2 channel
1
464.5000MHz
Brown
CH1 : 464.5500MHz / QT OFF
1W / 500mW
2
464.5500MHz
Yellow
Color : Yellow
3
467.7625MHz
J
CH2 : 467.9250MHz / QT OFF
4
467.8125MHz
K
Color : Blue Star
5
467.8500MHz
Silver Star
6
467.8750MHz
Gold Star
7
467.9000MHz
Red Star
8
467.9250MHz
Blue Star
All channels are Narrow band width. User can select channel frequency from above.
TK-3131
Destination
Number of CH
Frequency No. / Frequency / Color
RF power output
Bank A
Bank B
RX/TX
RX
TX
K
15 channel
CH1 : 462.5625MHz
CH1 : 462.5625MHz
462.5625MHz
1W / 500mW
CH2 : 462.5875MHz
CH2 : 462.5875MHz
462.5875MHz
CH3 : 462.6125MHz
CH3 : 462.6125MHz
462.6125MHz
CH4 : 462.6375MHz
CH4 : 462.6375MHz
462.6375MHz
CH5 : 462.6625MHz
CH5 : 462.6625MHz
462.6625MHz
CH6 : 462.6875MHz
CH6 : 462.6875MHz
462.6875MHz
CH7 : 462.7125MHz
CH7 : 462.7125MHz
462.7125MHz
CH8 : 462.5750MHz
White
CH8 : 462.5750MHz
467.5750MHz
White
CH9 : 462.6250MHz
Black
CH9 : 462.6250MHz
467.6250MHz
Black
CH10 : 462.6750MHz
Orange
CH10 : 462.6750MHz
467.6750MHz
Orange
CH11 : 462.5500MHz
CH11 : 462.5500MHz
467.5500MHz
CH12 : 462.6000MHz
CH12 : 462.6000MHz
467.6000MHz
CH13 : 462.6500MHz
CH13 : 462.6500MHz
467.6500MHz
CH14 : 462.7000MHz
CH14 : 462.7000MHz
467.7000MHz
CH15 : 462.7250MHz
CH15 : 462.7250MHz
467.7250MHz
All channels are Wide band width. Factory default setting is Bank A.
