2
PREPARATION
1 Match the four grooves of
the battery pack with the
corresponding guides on
the back of the transceiver.
2 Slide the battery pack along
the back of the transceiver
until the release latch on
the base of the transceiver
locks.
3 To remove the battery pack,
pull back on the release
latch and slide the pack
away from the transceiver.
Installing/ Removing the (Optional) NiCd Battery Pack
◆
DO NOT RECHARGE THE BATTERY PACK IF IT IS ALREADY
FULLY CHARGED. DOING SO MAY CAUSE THE LIFE OF THE
BATTERY PACK TO SHORTEN OR THE BATTERY PACK MAY
BE DAMAGED.
◆
AFTER RECHARGING THE BATTERY PACK, DISCONNECT IT
FROM THE CHARGER. IF THE CHARGER POWER IS RESET
(TURNED ON AFTER BEING TURNED OFF), RECHARGING
WILL START AGAIN AND THE BATTERY PACK WILL BECOME
OVERCHARGED.
◆
DO NOT SHORT THE BATTERY TERMINALS OR DISPOSE
OF THE BATTERY BY FIRE.
◆
NEVER ATTEMPT TO REMOVE THE CASING FROM THE
BATTERY PACK.
Summary of Contents for TK-285
Page 27: ...23 ...