Kenwood TK-2170 SERIES, Function Reference

Page: 48 / 142

36
Index Contents
Confidential FUNC (K)/Ver. 1.01
12 PTT ID
PTT ID is the identification code sent when the PTT
switch is pressed and/or released.
By using this ID, the dispatcher can identify the caller
without asking the user for their name.
The following items relevant to PTT ID can be configured
by using KPG-101D:
•
PTT ID Type
• Beginning of Transmit
• End of Transmit
• PTT ID (CH/GID)
• Restricted ID in Talk Around
12.1 PTT ID Type
PTT ID Type is the ID type for transmitting the PTT ID.
There are 2 types of PTT ID formats: DTMF and
FleetSync.
DTMF or FleetSync can be configured for PTT ID Type by
using KPG-101D.
Beginning of Transmit and End of Transmit can be
configured if DTMF is configured for PTT ID Type.
(Refer
to 12.1.1 Beginning of Transmit on page 36, 12.1.2 End
of Transmit on page 36.)
Fleet (Own) and ID (Own) can be configured if FleetSync
is configured for PTT ID Type.
(Refer to 20.7.1 Fleet/ ID
(Own) on page 99.)
„ Configuration using KPG-101D
• Configuring the PTT ID Type (Refer to FPRG
6.7.2 Common Page 2 Tab - PTT ID Type.)
12.1.1 Beginning of Transmit
Beginning of Transmit is the ID transmitted at the
beginning of transmission when DTMF is selected for the
PTT ID Type.
The content of the ID transmitted as BOT can be
configured by using KPG-101D. The transceiver does
not transmit an ID if the content of the ID is not
configured. ID can be configured for each channel in
Conventional Group.
„ Configuration using KPG-101D
• Configuring the Beginning of Transmit (Refer to
FPRG 6.7.2 Common Page 2 Tab - Beginning of
Transmit.)
• Configuring the PTT ID (BOT) (Refer to FPRG
6.4.14 PTT ID (BOT).)
12.1.2 End of Transmit
End of Transmit is the ID transmitted at the end of
transmission when DTMF is selected for the PTT ID
Type.
The content of the ID transmitted as EOT can be
configured by using KPG-101D. The transceiver does
not transmit an ID if the content of the ID is not
configured. ID can be configured for each channel in
Conventional Group.
„ Configuration using KPG-101D
• Configuring the End of Transmit (Refer to FPRG
6.7.2 Common Page 2 Tab - End of Transmit.)
• Configuring the PTT ID (EOT) (Refer to FPRG
6.4.15 PTT ID (EOT).)
12.2 PTT ID (CH/GID)
PTT ID (CH/GID) is the timing to transmit the PTT ID.
PTT ID can be enabled or disabled for each channel by
using KPG-101D. Following is the configuration list.
Table 12-1 Timing To Transmit PTT ID
(DTMF Configured for PTT ID Type)
PTT ID Timing To Transmit PTT ID
Off No PTT ID is transmitted.
BOT
Transceiver transmits the PTT ID each time
the
PTT switch at the transmitting party is
pressed.
EOT
Transceiver transmits the PTT ID each time
the
PTT switch at the transmitting party is
released.
Both
PTT ID is transmitted when the PTT switch
is pressed or released.