3 APRS
26
3.3 KISS Mode
An IGate station and or digipeater station can be operated using a PC that is installed with
the APRS software and with the KISS mode of the TH-D74A/E.
Operation of Digipeater via Combination of the TH-D74A/E and UI-View32
3.3.1
The TH-D74A/E can be combined with the UI-View32 to form a digipeater.
1.
Press
[F] [LIST]
in sequence to set the
KISS
mode to OFF.
Check to ensure that "
KISS12
” or
“KISS96”
is not displayed.
The "
KISS12
" or "
KISS96
" icon is illuminated when the TH-D74A/E is in the KISS mode.
2. Meanwhile, on the UI-View32, open the Comms Setup window from the Setup pull-down
menu.
3.
In the Comms Setup window, configure the PC terminal requirements of the
TH-D74A/E in UI-View32 as follows.
Baud Rate
：
9600 bps (either one); Data Bits: 8; Stop Bits: 1; Parity: None
COM Port
：
COM port number on the PC in use that is assigned as the virtual COM port by
the TH-D74A/E.
4. From the Host mode drop-down list, select “
KISS
”, followed by clicking the “
Setup
” button.
5. The KISS Setup window appears.
Configure as follows in Into KISS: 1: TN 2,0; 2: Blank; 3: Blank; 4: Blank. Next, click the
“OK”
button to close the KISS Setup window.
Summary of Contents for TH-D74A/E
Page 1: ...1 ...
