11
[LIST] (5)
Press
[LIST]
to display the Station list.
Press
[F]
,
[LIST]
to display the DX Cluster list
<APRS>
.
[BCON] (6)
Press
[BCON]
to enter the Beacon Transmit mode (When TX Beacon method
is Manual) or turn the Beacon function ON or OFF (When TX Beacon method
is other than Manual)
<APRS>
.
Press
[F]
,
[BCON]
to enter the Quick Beacon mode
<APRS>
.
[REV] (7)
Press
[REV]
to turn the Reverse function ON or OFF.
Press
[REV] (1s)
to turn the Automatic Simplex Checker ON.
Press
[F]
,
[REV]
to enter the Voice Alert function setup mode
<APRS>
.
[TONE] (8)
Press
[TONE]
to turn the Tone function ON.
•
Each time you press
[TONE]
, the function cycles through the following: Tone ON
➡
CTCSS ON
➡
DCS ON
➡
Cross Tone ON
➡
OFF.
•
Additionally, when APRS is ON and Voice Alert is confi gured, Voice Alert ON is
added to the above cycle.
Press
[F]
,
[TONE]
to enter the Tone frequency, CTCSS frequency, DCS code,
or Cross Tone setup mode.
Press
[F]
,
[TONE]
(1s)
to start the Tone frequency ID, CTCSS frequency ID, or
DCS code ID scan.
[PF] (9)
Press
[PF]
to activate its programmed function. The default function is
“Weather Channel” (TH-D72A)/ “Memory Name < > Frequency” (TH-D72E).
[MHz] ( )
Press
[MHz]
to enter the MHz mode.
Press
[MHz]
(1s)
to start the MHz scan.
Press
[F]
,
[MHz]
to enter Offset Direction setup mode.
•
Each time you press
[F]
,
[MHz]
, the offset direction cycles through the following:
plus (+) direction
➡
minus (–) direction
➡
–7.6 MHz (TH-D72E only)
➡
OFF.
[DUAL] (0)
Press
[DUAL]
to switch the Single band mode and Dual band mode.
Press
[F]
,
[DUAL]
to turn the Full duplex function ON or OFF.
[ENT] (#)
Press
[ENT]
to enter Frequency or Channel number entry mode.
Press
[F]
,
[ENT]
to enter Frequency step setup mode.
