Example: Using direct setting to set the frequency to 23.456,7MHz.
KEY OPERATION
FREQUENCY DISPLAY
REMARKS
110.000.0
Indicates frequency
before s e t t i n g
FREQ key
Frequency s e t t i n g
stand-by
Numeric key 2
2
Numeric key 3
23
Numeric key 5
235
Wrong input
BS key
23
Input correct ion
Numeric key .
23.
Numeric key 4
23.4
Numeric key 5
23. 45
Numeric key 6
23. 456
Numeric key 7
23.4567
Setting completed
ENT key
23. 456. 7
Unit sett ing/'output
4-1-3 STEP SETTING
In addition to the methods described in 4-1-1 and4-l-2, the STEP (FREQ) key @
can also be used to set the frequency. T h i s method changes the frequency i n
steps ( i n t e r v a l s ) . The step value i s set during the second function mode.
1) Press the 2nd F key © to enter the second function mode.
2) When the FREQ (MHz) key
©
I s pressed, the ENT key
?
s LED flashes and the
frequency display indicates the previously set step value.
3) Whi 1 e the ENT key's LED i s f l a s h i n g , use the numeric keys to enter the
desired step value. I f a wrong d i g i t i s entered, press the BS key @ to
erase the d i g i t s one by one s t a r t i n g from the l a s t input. Then enter
the correct value.
4) Select the step value u n i t . I f the ENT key i s pressed a f t e r the step
value has been input and while the LED i s flashing, the unit becomes MHz.
I f the kHz key i s pressed instead of the ENT key, the unit becomes kHz.
The d i s p l a y changes from i n d i c a t ing the step v a l u e to showing the
21
