25
SQUELCH LEVEL
You can adjust the default squelch level of the transceiver.
1
Enter the Function Setting mode {p.20}.
2
Press the or button to select “ ”.
3
Press the Menu button then press the or button to select your desired
value.
~
0 ~ 3
If you want to receive weak signal, decrease Squelch Level, and
if unnecessary signal exist, increase Squelch Level.
Note:
◆
In digital operation, Squelch Level is fixed at level 1.
4
Press the Menu button to confirm the selection, then press the PTT switch or
the Side button to exit the Function Setting mode.
