19
To change the operating frequency of a channel:
1
With the transceiver power OFF, press and hold the Menu button while turning
the transceiver power ON.
2
Press the or button to select your desired zone and channel.
• Press the button to change as follows.
• Press the button to change in reverse order.
3
Press the Menu button then press the or button to select the frequency
table number or OFF (skip channel) for the channel.
4
Press the Menu button to exit the selection, then press the PTT switch or the
Side button to exit the Front Panel Programming mode.
Note:
◆
You can mix analogue and digital table numbers in the same zone.
◆
You cannot set all channels (Zone 1 - Channel 1 to Zone 3 - Channel 16) to OFF.
◆
When Channel set for Second Channel is set to OFF, Second Channel function will also
be OFF {p.40}.
