TK-3201
2
GENERAL
INTRODUCTION
SCOPE OF THIS MANUAL
This manual is intended for use by experienced technicians
f a m i l i a r w i t h s i m i l a r t y p e s o f c o m m e r c i a l g r a d e
communications equipment. It contains all required service
information for the equipment and is current as of the
publication date. Changes which may occur after publication
are covered by either Service Bulletins or Manual Revisions.
These are issued as required.
ORDERING REPLACEMENT PARTS
When ordering replacement parts or equipment information,
the full part identification number should be included. This
applies to all parts, components, kits, or chassis. If the part
number is not known, include the chassis or kit number of
which it is a part, and a sufficient description of the required
component for proper identification.
PERSONAL SAFETY
The following precautions are recommended for personal
safety:
●
DO NOT transmit until all RF connectors are verified secure
and any open connectors are properly terminated.
●
SHUT OFF and DO NOT operate this equipment near
electrical blasting caps or in an explosive atmosphere.
●
This equipment should be serviced by a qualified technician only.
SERVICE
This radio is designed for easy servicing. Refer to the
schematic diagrams, printed circuit board views, and alignment
procedures contained within.
Destination
Number of CH
Frequency No. / Frequency / Signalling
RF power output
CH1
446.00625MHz
94.8Hz
CH2
446.09375MHz
88.5Hz
CH3
446.03125MHz
103.5Hz
CH4
446.06875MHz
79.7Hz
CH5
446.04375MHz
118.8Hz
CH6
446.01875MHz
123.0Hz
CH7
446.08125MHz
127.3Hz
E, T
16 channel
CH8
446.05625MHz
85.4Hz
0.5W
CH9
446.00625MHz
107.2Hz
CH10
446.09375MHz
110.9Hz
CH11
446.03125MHz
114.8Hz
CH12
446.06875MHz
82.5Hz
CH13
446.04375MHz
132N
CH14
446.01875MHz
155N
CH15
446.05625MHz
134N
CH16
446.08125MHz
243N
TK-3201
