13
BASIC OPERATION
SWITCHING POWER ON
Switch the transceiver power ON by turning the
Power
switch/
Volume
control clockwise.
• A confirmation tone sounds, the LCD lights up
momentarily, then the current channel number
is displayed.
Channel number
RAN number
Power ON / Volume UP
Power OFF
/ Volume DOWN
• Setting the color of the LED that lights up when the power is on, groups can be
color coded when grouping is necessary. Once you have decided on the color
of group, you can discovered which group immediately after turning on the
power. {p.63}
ADJUST THE VOLUME
Set your desired volume level by rotating the Power switch/ Volume control.
• Clockwise increases the volume and counterclockwise decreases the volume.
Note:
◆
To adjust the volume using background noise as a reference in Analog mode, use the
Squelch off Function.
SELECT A CHANNEL
Select a channel by pressing the
or
button.
Press
button
• A confirmation tone sounds each time you press the
or
button.
