50
CALLER ID DISPLAY
When the transceiver receives a PTT ID signal, the caller ID of that signal appears
on the display, so you know who is making the call.
1
Enter the Setting mode {p.37}.
2
Press the or button to select “
”.
3
Press the
Menu
button then press the or button to select your desired
value.
OFF
Even if PTT ID signal is received, the PTT ID is not displayed.
ON
When PTT ID signal is received, the PTT ID is displayed
4
Press the
Menu
button to confirm the selection, then press the
PTT
switch or
the
Side
button to return to the operation mode.
PTT HOLD
It is a function to operate handsfree without using the VOX function. Normally,
you keep pushing the
PTT
switch when transmitting, but if you set this function to
ON, if you press the
PTT
switch once, the transmission will continue even if you
release the
PTT
switch. To stop sending, press the
PTT
switch again.
1
Enter the Setting mode {p.37}.
2
Press the or button to select “
”.
3
Press the
Menu
button then press the or button to select your desired
value.
OFF
Press the PTT switch and release it to end the transmission.
ON
When you press the PTT switch once, the pressed state will
continue.
2-times
When you press the PTT switch twice quickly, the pressed state
will continue.
4
Press the
Menu
button to confirm the selection, then press the
PTT
switch or
the
Side
button to return to the operation mode.
