29
NXDN
NXDN is a general term for the NXDN wireless communication protocol which
uses 4 Level FSK. Various digital communications, including individual and group
voice communications are possible.
SELCALL MODE (SELECTIVE CALLING)
The basic operation is the same as Selcall in FleetSync.
Step 1:
Set up your own ID (ID List Setting mode for Selcall)
1
With the transceiver power OFF, press and hold while
turning the transceiver power ON.
• A beep will sound and the transceiver will enter ID List
Setting mode.
• It can not be set unless editing in ID List Setting mode is
permitted on the FPU.
2
Press the
or button to select a list ID number.
3
Press the
Menu
button then press the
or button to
select List ID type.
• List ID type has the following settings.
“
” represents an Individual Call ID.
“
” represents a Group Call ID.
“
” represents a ALL Group Call ID.
“
” represents your own ID number.
• The default own ID setting is List 01.
• When setting up your own ID, make sure that each member within your
group sets up a unique ID number for their own ID. If an own ID number
is duplicated, that transceiver cannot perform individual calls to other
transceivers with the same own ID.
4
Press the
Menu
button to confirm the selection.
5
Press the
PTT
switch or the
Side
button to exit ID List Setting
mode.
List ID number
List ID type