1-32 (No.RA070<Rev.001>)
4.3
Panel Tuning Mode
4.3.1 Transceiver tuning (To enter tuning mode)
To enter tuning mode, press the [ ] button while the transceiver
is in test mode. Use the [ ] button to write tuning data through
tuning modes, and the [
]/[
] button to adjust tuning
requirements (1 to 4096 appears on the LCD).
Use the [ ] button to select the adjustment item through tuning
modes. Use the [
] button to adjust 5, 6 or 10 reference level
adjustments, and use the [
] button to switch between Wide 5k/
Wide 4k/Narrow.
• LCD display in panel tuning mode
4.3.2 Button operation
4.3.3 5, 6 or 10 reference level adjustments frequency
5 reference level adjustment
IQ Phase / RSSI Reference 1 DSP (Receive) / RSSI Reference 2 RF IC (Receive) / RSSI Reference 3 DSP(Standby) / RSSI
Reference 4 RF IC (Standby) / Squelch Open / Squelch Tight / Low RSSI / High RSSI
<5 points>
6 reference level adjustment (Analog Wide 5k, Analog Wide 4k)
Maximum Deviation / QT Deviation / DQT Deviation / LTR Deviation / DTMF Deviation / MSK Deviation
<6 points>
An AST 256
2.6
CV voltage, AD value, etc
Sub LCD display
800M TX L
Adjustment point
Main LCD display
Adjustment value
(1~4096)
Proper value guide
(When the frequency
adjustment is necessary,
or is displayed.)
Adjustment item
An : Analog narrow mode
Aw : Analog wide 5k mode
As : Analog wide 4k mode
Nn : NXDN narrow mode
Nv : NXDN very narrow mode
D : DMR mode
800M TX L
800M TX C
800M TX H
800M RX/TA L
800M RX/TA C
800M RX/TA H
900M TX L
900M TX H
900M RX/TA L
900M RX/TA H
Button
Function
Push
Hold (1 second)
[Selector] -
[
]
Adjustment value up
Continuation up
[
]
Adjustment value down
Continuation down
[
]
Auto adjustment start
Output tone pattern
change of balance
adjustment (A change is
possible only during
balance adjustment.)
[
]
Wide 5k/Wide 4k/Narrow/
NXDN/DMR
-
[ Side1 ] -
[ Side2 ] -
[ ]
Shift to panel test mode
-
[
]
To enter 5, 6 or 10
reference level adjustments
-
[ ]
Writes the adjustment
value
-
[ ]
Go to next adjustment
item
Back to last adjustment
item (At the time of 5, 6 or
10 point adjustment:
Adjustment point change)
[AUX
(Orange)]
-
-
[PTT]
Transmit
[0] to [9]
and
[#],[ ]
-
Tuning No.
Name
Display
RX (MHz)
TX (MHz)
1
800MHz TX Low
800M TX L
806.050000
806.100000
2
800MHz TX Center
800M TX C
815.550000
815.600000
3
800MHz TX High
800M TX H
823.950000
823.900000
4
900MHz RX/TA Low
900M RX/TA L
935.050000
935.100000
5
900MHz RX/TA High
900M RX/TA H
939.950000
939.900000
Tuning No.
Name
Display
RX (MHz)
TX (MHz)
1
800MHz TX Low
800M TX L
806.050000
806.100000
2
800MHz TX Center
800M TX C
815.550000
815.600000
3
800MHz TX High
800M TX H
823.950000
823.900000
4
800MHz RX/TA Low
800M RX/TA L
851.050000
851.100000
5
800MHz RX/TA Center
800M RX/TA C
859.950000
859.900000
6
800MHz RX/TA High
800M RX/TA H
868.950000
868.900000
