12
BASIC OPERATIONS
SWITCHING POWER ON/OFF
Turn the
Power
switch/
Volume
control clockwise to switch the
transceiver ON.
Turn the
Power
switch/
Volume
control counterclockwise fully
to switch the transceiver OFF.
■
Transceiver Password (Types I and II Only)
If your transceiver is password protected, you must first
enter the password before you can use the transceiver.
1
Rotate the
Selector
to select the first digit of the
password.
2
Press the
S
or
key to accept the entry and move to
the next digit.
• Press the
A
or
#
key to delete an incorrect digit.
3
Repeat steps 1 and 2 to enter the entire password.
• The password can contain a maximum of 6 digits.
4
Press the
S
or
key to confirm the entered password.
• If you enter an incorrect password, an error tone sounds
and the transceiver remains locked.
ADJUSTING THE VOLUME
Rotate the
Power
switch/
Volume
control to adjust the volume.
Clockwise increases the volume and counterclockwise
decreases it.
SELECTING A ZONE AND CHANNEL/GROUP ID
Select the desired zone using the key programmed as
[Zone
Select]
or
[Zone Up/Down]
. Each zone contains a group of
channels.
Select the desired channel/group ID using the
Selector
knob
(default). Each channel/group ID is programmed with settings
for transmitting and receiving.