NX-210(G)
8
1. Precautions for Waterproof
• The orange packing material on the reverse side of the
transceiver is important with respect to the waterproof ef-
fi ciency of the transceiver. Do not place stickers or other
materials on or around the packing material shown in the
fi gure, or on the reverse side of the battery pack. Doing
so will impair the waterproof effi ciency of the transceiver
and may cause it to break down. Additionally, in order to
prevent damage to the packing material, do not allow it to
come in contact with foreign materials.
2. Precautions for Disassembly
■
Removing the TX-RX unit from the chassis
1. Remove the Cord ASSY from the connector (CN337) of
the TX-RX unit
a
.
2. Remove the Speaker lead wire from the connector
(CN805) of the TX-RX unit
b
.
3. Remove the VOL/CH FPC from the connector (CN201) of
the TX-RX unit
c
.
4. Remove the Universal connector FPC from the connector
(CN804) of the TX-RX unit
d
.
5. Remove the PTT FPC from the connector (CN806) of the
TX-RX unit
e
.
6. Remove the 14 screws
f
.
7. Anchor the screw hole of the TX-RX unit using the tip of a
pair of tweezers as shown in the fi gure. Then, lift the TX-
RX unit to remove it from the chassis
g
.
Cord ASSY
CN201
CN806
VOL/CH FPC
Universal
Connector FPC
CN805
CN337
CN804
PTT FPC
TX-RX unit
@
:
.
;
=
DISASSEMBLY FOR REPAIR
B
B
B
B
B
B
B
>
■
Removing the TOP packing (G53-1600-12)
1. Pull the TOP packing to the left to remove the packing
that is fi t into the left groove of the chassis q.
2. Pull the TOP packing to the right to remove the packing
that is fi t into the right groove of the chassis w.
3. Turn back the TOP packing as shown in the fi gure e.
4. Remove the TOP packing r.
:
@
.
;
3. Precautions for Reassembly
■
Mounting the Display unit onto the chassis
Insert the tab of the speaker holder into the hole in the
upper part of the chassis.
Speaker holder
