background image

62

 EN

Important items (continued)

Never play a cracked or warped disc

During playback, the disc rotates at high
speed in the player. Therefore, to avoid dan-
ger, never use a cracked or deformed disc
or a disc repaired with tape or adhesive
agent. Please do not use discs which are
not round because they may cause a mal-
function.

Disc accessories

The disc accessories (stabilizer, protection
sheet, protection ring, etc.) which are mar-
keted for improving the sound quality or pro-
tecting discs as well as the disc cleaner
should not be used with this system be-
cause they may cause malfunction.

Handling of MD

As the MD is accommodated inside a car-
tridge, it can be handled without caring
about dust or fingerprint. However, stained
or soiled cartridge may cause malfunction.
To enjoy beautiful sound for extended pe-
riod of time, take care on the following
points.

Do not touch the disc directly.

Do not touch the disc by
opening the shutter with
your hand. The cartridge will
be damaged if it is forced
open.

Storage position

Do not leave MDs in place where the tem-
perature and/or humidity are extremely high
(for example, in a place subject to direct
sunlight).

Write protect tab

Slide close.
(Recording enabled)

Disc back side

Slide open.

(Recording disabled)

Dust countermeasure

The shutter of the disc cartridge is perma-
nently open while the disc is loaded in the
set. Therefore, to prevent dust from pen-
etrating inside the disc, take the disc out of
the unit immediately after completion of
recording or playback.

Care

Wipe periodically dust and dirt attached on
the cartridge with a dry cloth.

Note on disc accessories

Do not use the lens cleaner for this may
lead to malfunction of the unit.

Write protect tab

To protect recorded contents against acci-
dental erasure, set the write protect tab of
the disc open. Return the tab to the original
position when you want to record signals
on the disc.

Note on the cartridge labels

Apply each label firmly to every corner so
that it will not be peeled off.

Caution on MD-Clip data

Do not attempt to record or edit a disc in
which MD-Clip data (still images, etc.) have
been recorded. Otherwise, the Clip data
may be lost.

Summary of Contents for MDX-G3









































































Reviews: