9
4. Operating the radio
4.1 Switching On / Off (standby)
Press the Standby key on the device or on the remote control to switch on the radio. Press the button
again to put the device into standby mode. To switch it off completely, disconnect the radio from the
power supply.
4.2 Navigate in the menus
Press the
<MENU>
key on the remote control to call up the source-related menu.
Press the
<Skip track forwards>
or
<Skip track backwards>
on the device or on the remote
control to navigate within the menus. Confirm the menu selection with the
<OK>
key on the remote
control or the
<SELECT>
key on the device. Proceed likewise when selecting the settings.
4.3 Adjusting the volume
You can adjust the volume by turning the volume control. For this you can also use the
<VOL+>
and
<VOL->
keys on the remote control. The volume setting is graphically displayed on the Display.
4.4 Setting the sound (equaliser)
The system has five preset sound settings:
"FLAT" / "CLASSIC" / "POP" / "JAZZ" / "ROCK"
.
These can be selected with the
<EQ>
key on the remote control.
4.5 Additional information
By repeatedly pressing the
<INFO/INTRO>
button, depending on the source and station, additional
information can be displayed:
•
Description
•
Name of the station, the current program, content, topics, etc.
•
Genre
•
Signal level and signal error
•
Bit rate
•
Channel information
•
Today's date and current time
4.6 Setting the menu language
1. Switch the radio on and call up the menu.
2. Select the
"System"
menu and confirm the selection.
3. Now select the "
Language"
menu and confirm.
4. In the following menu, select the desired language and confirm.
4.7 Setting the time and date
When receiving a DAB + or FM station in sufficient quality, the clock will be set automatically. De-
pending on the reception strength, this process may take some time. If no corresponding station is
available, you can also set the time manually:
1. Switch the radio on and call up the menu.
2. Select the
"System"
menu and confirm the selection.
3. Now select the "
Time"
menu and confirm.
4. Select
"Set Time/Date"
and confirm. Then select, set and confirm hours, minutes, day, month
and year.
