9
Remote Control Function
<Provided with the KTC-V800N/KTC-V800P>
Do not set the remote on hot places such as above the
dashboard.
Loading and Replacing the Batteries
1.
Use two "AA" batteries:
Slide the cover while pressing downwards to remove it
as illustrated.
2.
Insert the batteries with the
ª
and
·
poles aligned
properly following the illustration inside the case.
Store unused batteries out of the reach of children. Contact
a doctor immediately if the battery is accidentally swallowed.
•The provided batteries are intended for use in operation checking, and their service life may
be short.
• When the remote controllable distance becomes short, replace both of the batteries with
new ones.
NOTE
2
WARNING
2
CAUTION
REMOTE CONTROL UNIT
RC-210
AME
SP
SEEK
MODE
V.SEL
CH. –
CH. +
AV OUT
VOL
5
∞
SEARCH
M/S
BAND
4
¢
Monitor Control Function
• V.SEL button
Each time you press V.SEL button to switch the monitor's picture.
• MODE button
Each time you press MODE button to switch the screen mode.
• AV OUT button
Each time you press AV OUT button to switch the AV output
mode.
TV Control Function
• BAND button
Each time you press the BAND button, the preset band
switches between the TV1 and TV2.
• SEARCH buttons
Press the
¢
/CH.+ button to make increasing seeks.
Press the
4
/CH.– button to make decreasing seeks.
• SEEK button
Each time you press the SEEK button, the seek mode switches
to auto 1, to auto 2 and to manual.
• AME button
You can automatically store all the receivable channels in the
band currently being looked to.
Select the band for auto memory entry.
Press the AME button.
Press the
¢
/CH.+ button to start auto memory entry.
3
2
1
IM_W_English_ver.5 02.12.20 1:38 PM Page 9
