Setting the Remote Sensor On/Off [REMOTE]
If this unit also runs when operating other units with
different Kenwood remote controls, its remote
control function can be turned off.
Press the [
2
] or [
3
] button to switch the function
on and off.
FM Transmitter Function [FM-TX]
<When the KTC-V800N* or KTC-V800P is connected>
You can use the FM transmitter function to hear the
sound of the TV, video from your car FM radio.
Press the [
2
] or [
3
] button to change the frequency
by 0.1 MHz step and off [OFF].
• *The KTC-V800N is not display the FM transmitter function
depending on the sales area.
• Be sure to select a frequency that is not the same as a
broadcast station in your area.
• The auto seek function on your car radio may not stop at
the FM transmitter frequency. In this case, use the manual
seek function to set the radio to the FM transmitter
frequency.
Switching the AV Output [AV-OUT]
<When the KTC-V800N or KTC-V800P is connected>
Press the [
2
] or [
3
] button, the AV output mode
switches as follows:
▼
[NORMAL](NOR): Picture/sound with monitor picture
▼
[TV]: Television picture/sound
▼
[VIDEO1](VD1): Video 1 picture/sound
▼
[VIDEO2](VD2): Video 2 picture/sound
NOTE
English
8
Operation
7.0-inch WIDE COLOR LCD MONITOR
SCRN
MODE
V.SEL
FUNCTION
REMOTE OFF
FM-TX 87.5MHz
AV-OUT NORMAL
87.5
3
3
FUNCTION
REMOTE OFF
FM-TX 87.5MHz
AV-OUT VIDEO1
VD1
NOR
TV
VD2
3
3
FUNCTION
REMOTE OFF
FM-TX 87.5MHz
AV-OUT NORMAL
OFF
ON
3
3
IM_W_English_ver.5 02.12.20 1:38 PM Page 8
