KVT-817DVD/827DVD/827DVDY
KVT-837DVD/847DVD/867DVD
37
●
Service Screen
• Service information is displayed/cleared.
• EEPROM Chroma data is cleared.
• DC Offset detection information is displayed/cleared.
Init
Init
Init
Init
Init
Start
Serial
Ready
None
Chroma
Clear
Clear
DCOffset
Return
Power On
∗∗∗
hour
∗∗∗
hour
∗∗∗
time
∗∗∗
time
∗∗∗
time
DVD Play
DVD Eject
Mon. Open
Mon. Close
Key Specification
Init: Items to be initialized are selected.
■
Start : Items that are selected with long-press (1 second
or more) are initialized.
Serial: Serial No Manual Input Screen is displayed.
Clear: EEPROM Chroma data is cleared.
Clear: EEPROM DC Offset information data is cleared.
Return: Test Mode Main Screen is displayed.
Note: As for DVD related items, those other than M707.
Note: The key arrangements are somewhat different for OSD
model and Graphic model.
Adjustment Procedure
Service Information
• Select those items to be initialized by pressing Init Key. (More
than one can be selected. / Those items that are selected
are focus displayed.)
• When selection is complete, press Start Key for 1 second
or more. The Service Information displayed is initialized.
• Chroma information is normally Ready-displayed. When
EEPROM data is cleared, Clr OK/NG is displayed.
• At the time of Clear, if not reset, When Chroma Adjustment
Screen is displayed., the previous data is maintained. It is
only after resetting that the cleared data is reflected.
• As for DC Offset information, None means no detection and
Detect means information detected.
• With Clear key, detection information is cleared.
●
Serial Number Input Screen
• The serial number for each set is written.
Serial Number Input Screen
0
1
2
– – – – – – – –
3
7
8
9
4
5
6
Clear
Cancel
Key Specification
0~9: 10Keys for Serial Number Input
Clear: Serial number being input is cleared.
Cancel : Service Screen is displayed.
Serial Number Input writing Screen
∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗
Clear
Cancel
Enter
Key Specification
Clear: Serial number being input is cleared.
Cancel: Service Screen is displayed.
Enter: Serial Number writing start (Write OK means normal
ending. write NG display means error. )
When OK, Service Screen is displayed with this key.
When NG, enter the Test Mode again, and re-do from the
beginning.
Note: The key arrangements are somewhat different be-
tween OSD model and Graphic model.
TEST MODE
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
