KVT-817DVD/827DVD/827DVDY
KVT-837DVD/847DVD/867DVD
33
●
Screen Management section
• While in the Test Mode (Including connection with special
µ
-com/jig), the startup will be with VIDEO screen.
→
Transi-
tion to Test Mode Main screen is made with [FNC] key.
• In coordination with V.SEL, AVOUT is also switched. (AVOUT
with Graphic and NAVI can be anything.)
AVIN1 – (AVIN2) – (TV) – R-CAM – NAVI-DVD (NO specific
order)
• Easy Control screen can be skipped using [FNC] key.
• Parking detection is ignored in Test Mode. However, Park-
ing is not ignored when Unit is special.
• Reverse condition occurring in Test Mode will be made On
condition (VSEL always has RCAM). However, when Unit is
special, it will be as usual.
(When detected, Reverse will cause R-CAM interruption,
as usual.)
• Default screen of System Setup will be made System 2.
• Default screen of Audio Setup will be made Speaker Setup.
• Default speaker selected of Speaker Setup will be made
Sub-woofer.
• When VIDEO 1 video is input or at signal switching (NTSC
↔
PAL) will not be OSD displayed. (OSD display will be
made at V.SEL switching. Display will not be made at the
time of VIDEO 1.)
●
BEEP Control
• Beep will be sound regardless of destinations
(When Standby sourcing, Beep will not be sound as PWIC
limitation item.)
●
DSI Control
• AVIN2 (AVIN1 for models with no AVIN2) Interruption will
• NAVI interruption SP setting will be default FRONT ALL.
• V-IN mirror mode switching will be conducted with remote
• R-CAM Interruption will be made default On.
●
SCREEN Adjustment
• Default is center. With one click, FullDown
↔
Center
↔
FullUp.
• Default for BRT is MAX.
• The default for Auto Dimmer is Off and Dimmer Level 0.
Wait for switching detection will be cut.
●
Audio
• Default for Volume is Step 30.
• Bal/Fad setting is one click: Min
↔
Center
↔
Max
• Default for LineMute is On.
• Xover setting is one click: Min
↔
Max.
• Default for Center Speaker is Speaker is installed. (The set-
ting value is arbitrary.)
• Setting for Sub-woofer is On
↔
Off. (The setting value for
On is arbitrary.)
• Default for PEQ is Flat.
• The transition for Effect Mode: Center
↔
Bypass
↔
CS II (Music)
↔
PL II (Movie)
↔
Center
●
TUNER
• When E2PROM cannot be accessed, Error display will be
made. (Tuner screen)
• Forced Narrow/ Middle/ Wide switching of K3I.
By long pressing of Preset 4: Forced Narrow (
∗∗∗
.
∗
1MHz)
By long pressing of Preset 5: Forced Middle (
∗∗∗
.
∗
2MHz)
By long pressing of Preset 6: Forced Wide (
∗∗∗
.
∗
3MHz)
●
DVD
• CD media KTD-02A and DVD media, TDV-540A/TTD-100
are used.
• When Test Mode is started up in with Disc and Panel Open
condition, the disc will not be ejected (The same as usual)
• Region code is set at the minute position of the time code.
• At time of CDDA media, RDM key will cause transfer to Track
28.
• At time of CDDA media ,pressing TrackUP key will cause: 9
→
15
→
10
→
11
→
12
→
13
→
14
→
9.
• When loading, Title1-Chapter1 (Indicated with
★
in table
next page)
TEST MODE
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
