Select the category and channel you wish to listen to.
<KDC-MP225, KDC-225MR, KDC-225, KDC-2025,
KDC-MP222>
1 Enter category and channel search mode
Press the [FM] button for at least 1 second.
2
Select the category
Press the [FM] or [AM] button.
3
Select the channel
Press the [
4
] or [
¢
] button.
Canceling category and channel search mode
Press the [FM] button for at least 1 second.
Entering and canceling the category and channel search mode
with remote
Press the [
38
] button on the remote.
<Others>
1
Enter category and channel search mode
Press the [
38
] button.
2
Select the category
Press the [FM] or [AM] button.
3
Select the channel
Press the [
4
] or [
¢
] button.
Canceling category and channel search mode
Press the [
38
] button.
You cannot operate this unit until all the Category information is
acquired.
Category and Channel Search
Every receivable Channel is checked for 10 seconds.
1
Start Channel Scan
Press the [AUTO] button for at least 2 seconds.
The channel scan will start.
2
Release it when the channel you want to listen to is received
Press the [AUTO] button for at least 2 seconds.
Channel Scan
Calling up the channels in the memory.
1
Select the preset band
Press the [FM] button.
2
Call up the channel
Press the [1] — [6] button.
Preset Tuning
— 7 —
Sets the seeking mode.
Press the [AUTO] button.
Each time the button is pressed the Seek mode switches as
shown below.
Display
Operation
"Channel"/"CHANNEL"
Normal manual seeking control.
"Preset"/"PRESET"
Search in order of the channels in the
Preset memory.
This function cannot be used in the category and channel search
mode.
Switching Seek Mode
KTC-SR903(K)English 04.4.20 6:02 PM Page 7
