Kenwood KSC-WD250T, Instruction Manual

Page: 4 / 16

4 English
Examples of Connections
■
General connection
REAR
SP. L
INPUT
REAR
SP. R
INPUT
REAR
SP
. L
INPUT
REAR SP
. R
INPUT
CENTER UNIT
• If there is no power control
terminal in the center unit,
connect the blue/white wire to
the accessory line (ignition key
switch ACC position line).
Car fuse box
Ignition key
switch
Car fuse box
(Main fuse)
Battery
Caution
• Connect the black lead wire ground terminal directly with a screw to an unpainted metal part of
the vehicle. Turning the power ON without connecting this terminal is linked to damage of the
stereo system. Be sure to connect it.
Also, painted metal panels etc., are not grounded and will not function correctly. Be careful.
• If buzzing noise is heard from
the speakers when the engine is
running, attach a line noise filter
(sold separately) to the power
lead.
Blue / white
To the power control
terminal
Black
10-pin connector cord
Caution: ––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Under any circumstances, never apply inputs to the terminals
A
and
B
simultaneously.
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
CENTER UNIT
SUBWOOFER OUT
Unused terminal
Cover unused terminals with insulation
tape to avoid short circuits.
Black
10-pin connector cord
Fuse 5A × 2
Green
Green / Black
Purple / Black
Purple
Yellow
■
Connection to center unit with non-fader (subwoofer control)
Yellow
RCA cord
( Commercially
available parts)
Fuse 5A × 2
• If there is no power control
terminal in the center unit,
connect the blue/white wire to
the accessory line (ignition key
switch ACC position line).
Car fuse box
Ignition key
switch
Car fuse box
(Main fuse)
Battery
Blue / white
To the power control
terminal
Caution
• Connect the black lead wire ground terminal directly with a screw to an unpainted metal part of
the vehicle. Turning the power ON without connecting this terminal is linked to damage of the
stereo system. Be sure to connect it.
Also, painted metal panels etc., are not grounded and will not function correctly. Be careful.
• If buzzing noise is heard from
the speakers when the engine is
running, attach a line noise filter
(sold separately) to the power
lead.
1̲KSC-WD250T̲1English.indd 4 1̲KSC-WD250T̲1English.indd 4 06.3.8 5:36:17 PM 06.3.8 5:36:17 PM