Kenwood KRF-V7090D Instruction Manual Download Page 38

Page: 38 / 40

ENGLISH

Remote control unit

Symptom

Remote control operation is not possible.

In case of difficulty

Cause

• The remote control unit is set to the DVD

player operation mode.

• Batteries are exhausted.
• The remote control unit is too far away from

the main system, controlling angle is too large,
or there is an obstacle between this model and
the remote.

• The remote control has not been set to the

operation mode for the KENWOOD DVD player
you wish to control.

Remedy

• Press any of the

Input Selector

keys to select

the appropriate operation mode.

• Replace with new batteries.
• Operate the remote control unit within the

controllable range.

• Press the

CD/DVD

key or

DVD/6CH

key to

activate the operation mode for the component
you want to control before operation.

ﬂ

*5536/35-40/EN

05.2.8, 0:06 PM

Summary of Contents for KRF-V7090D









































Search results

Summary of Contents for KRF-V7090D

Reviews:

Related manuals for KRF-V7090D

Brands by name

Popular brands

Kenwood KRF-V7090D, Instruction Manual

Search results

Summary of Contents for KRF-V7090D

Reviews:

Related manuals for KRF-V7090D

Brands by name

Popular brands