Kenwood KRF-V5200D Instruction Manual Download

Page: 22 / 40

English

Normal Playback

Adjusting the sound

TONE

BASS BOOST

MULTI CONTROL

ACTIVE EQ

MUTE

MULTI CONTROL ACTIVE EQ

Adjusting the Tone (remote control only)

You can adjust the sound quality when this unit is in the PCM
stereo and analog stereo mode.

Press [TONE] to select the Tone mode.

∑

Use [MULTI CONTROL

∞

] to select "TONE ON" or

"TONE OFF".

When in "TONE ON" selection, press [TONE] for the

following displays.

Display

Setting

Range

"BASS"

Adjusts low frequency range.

-10 – +10 (in 2 step)

"TREB"

Adjusts high frequency range.

-10 – +10 (in 2 step)

Use [MULTI CONTROL

∞

] to adjust the sound

quality.

• When the ACTIVE EQ mode is set to ON, set it to OFF and then

control the TONE setting.

†

Press [TONE].

One-touch low frequency emphasis (Bass

One-touch low frequency emphasis (Bass
Boost) (remote control only)

Boost) (remote control only)

You can adjust the sound quality when this unit is in the PCM
stereo and analog stereo modes.

Press [BASS BOOST].

• Press the key once to select the maximum (+10) low frequency

emphasis setting.

• TONE will automatically be turned ON.
• This key does not function when this unit is in the sound quality

or ambience effects adjustment mode.

• When the ACTIVE EQ mode is set to ON, set it to OFF and then

control the BASS BOOST setting.

To cancel

Press [BASS BOOST] again.

Muting the sound (remote control only)

Press [MUTE] to mute the sound of the speakers.

"MUTE" indicator blinks.

To cancel

Press [MUTE] again so that the "MUTE" indicator goes
off.

• MUTE can also be deactivated by adjusting volume.

ACTIVE EQ mode

You can enjoy a more impressive sound effect when ACTIVE EQ is
turned ON during Dolby Digital and DTS playback and, when in
PCM and analog stereo mode.

Press [ACTIVE EQ] for the following selections;

Display

Setting

"ACTIVE EQ MUSIC"

Effective when listening to music.

"ACTIVE EQ CINEMA"

Effective when watching a movie.

"ACTIVE EQ GAME"

Effective when playing a game.

"ACTIVE EQ OFF"

Active EQ function is off.

• ACTIVE EQ function will not be available when REC MODE, AUTO

TUNING or PRESET MEMORY is ON and during 96kHz LPCM
playback.

ACTIVE EQ indicator lights up.

ACTIVE EQ

B60-5676-00̲00.indd 22

07.4.12 9:57:25 AM

Summary of Contents for KRF-V5200D









































Search results

Summary of Contents for KRF-V5200D

Reviews:

Related manuals for KRF-V5200D

Brands by name

Popular brands

Kenwood KRF-V5200D, Instruction Manual

Search results

Summary of Contents for KRF-V5200D

Reviews:

Related manuals for KRF-V5200D

Brands by name

Popular brands