Kenwood KRC-508S Page 8 Instruction Manual Download

Page: 8 / 36

Do not set the right side of the faceplate in the faceplate bracket
first, when reattaching the faceplate. Doing so may cause the
connector on the faceplate bracket to malfunction.

Press the right side of the faceplate until it locks.

Hiding the control panel:

Press the release button and slide open the faceplate.

Push upward the back of the control panel and reverse the
panel.

The panel cannot be reversed when the faceplate is not attached.

Opening the control panel:

Press the upper side of the faceplate.
The faceplate will open.

Push the bottom of the control panel and close the faceplate.

NOTE

CAUTION

The faceplate can be reversed to hide the control panel or
detached form the unit, helping to deter theft.

Removing the Faceplate:

• When the control panel is visible

Press the release button.

• When the control panel has been hidden:

Press the upper side of the faceplate.

Holding the center part of the faceplate, pull it out.

Push back the bottom of the faceplate bracket until it locks.

• Do not apply excessive force to the faceplate bracket without

attaching the faceplate. Doing so will cause the faceplate
bracket to be deformed.

• Do not touch the connector on the faceplate bracket after

removing the faceplate. Touching the connector may cause
damage to the unit.

• Do not touch two metal parts on both sides of the faceplate

bracket. Touching those parts may injure you.

• The faceplate is a precision piece of equipment and can be

damaged by shocks or jolts. For that reason, keep the faceplate
in its special storage case while detached.

• Do not expose the faceplate or its storage case to direct

sunlight or excessive heat or humidity. Also avoid places with
too much dust or the possibility of water splashing.

Reattaching the Faceplate:

Hold the faceplate so that the control panel faces the front
toward you and set the left side of the faceplate in the
faceplate bracket.

NOTE

CAUTION

Theft Deterrent Faceplate

General features

— 8 —

English

KRC-608(K)_U.S_r2 00.12.27 0:11 PM Page 8

Summary of Contents for KRC-508S





































Search results

Summary of Contents for KRC-508S

Reviews:

Related manuals for KRC-508S

Brands by name

Popular brands

Kenwood KRC-508S, Instruction Manual

Search results

Summary of Contents for KRC-508S

Reviews:

Related manuals for KRC-508S

Brands by name

Popular brands