English
— 34 —
Troubleshooting Guide
The following messages are displayed when certain problems are occurring in your system. Take the
recommended actions.
Nothing has been recorded on the MD.
]
The next MD will automatically be played.
BLANK
No disc magazine has been loaded in the changer. The disc magazine is not completely loaded.
]
Load the disc magazine properly.
No CD in the unit.
]
Insert the CD.
EJECT
No disc has been loaded in the disc magazine.
]
Load a disc into the disc magazine.
The CD is quite dirty. The CD is upside-down. The CD is scratched a lot.
]
Clean the CD and load it correctly.
E-04
No tracks are recorded on the MD, although it has a title.
]
The next MD will automatically be played.
NO TRACK
The unit is malfunctioning for some reason.
]
Press the reset button on the unit. If the "E- 77" code does not disappear, consult your nearest service center.
E-77
The protective circuit in the unit activates when the temperature inside the automatic disc changer exceeds 60°C (140°F),
stopping all operation.
]
Cool down the unit by opening the windows or turning on the air conditioner. As the temperature falls below 60°C (140°F),
the disc will start playing again.
HOLD
No disc has been loaded in the disc magazine.
]
Load a disc into the disc magazine.
NO DISC
Something is wrong with the disc magazine. Or the unit is malfunctioning for some reason.
]
Check the disc magazine. And then press the reset button on the unit. If the "E- 99" code does not disappear, consult your
nearest service center.
E-99
If this indicator continues blinking, it is possible that the tape has become jammed or tangled.
]
Contact the Kenwood dealer if the cassette tape cannot be ejected.
IN
The faceplate of the slave unit being connected to this unit has been removed.
]
Replace it.
NO PANEL
KRC-608(K)_U.S_r2 00.12.27 0:12 PM Page 34
