KRC-225/235/265/265S
8
ADJUSTMENT
Set the controls and switches as follows.
BALANCE : center position
BASS : center position LOUDNESS : OFF
FADER : center position
TREBLE : center position
OUTPUT
RECIEVER
ALIGNMENT
SETTINGS
SETTINGS
POINTS
1) During FWD transport adjust and ' so that
line A of 2-LINE TAPE passes through the center
of the head shield plate (core center area)
2) During RVS transport adjust and ' so that
line B of 2-LINE TAPE passes through the center
of the head shield plate (core center area)
3) After the alignment above, reverse the transport
direction and check the FWD alignment again. If it
is deviated, perform alignment again. (Tape used :
SCC-1659, manufactured by A-BEX)
[2]
HEAD
AZIMUTH
TCC-153
10kHz
Connect an AC
voltmeter and
oscilloscope to
SP outputs.
TAPE PLAY
Head Azimuth
Screw
Adjust the azimuth for each L ch/R ch or FWD/RVS
becomes maximum.
CASSETTE DECK SECTION
HEAD
HEIGHT
[1]
No.
ITEM
TAPE
ALIGN FOR
Head Height
Screw
TAPE PLAY
-
SCC-1659
F
R
R
F
(2-LINE TAPE)
B
A
B
A
(FWD)
(RVS)
HEIGHT
(FWD)
HEIGHT/AZIMUTH
(FWD)
HEIGHT/AZIMUTH
(RVS)
TAPE SPEED
HEIGHT
(RVS)
F
'
'
F
R
R
